ADIC Scalar AIT 440, Installation And Operating Manual

Page: 59 / 205

Chapter 2
34 Scalar AIT 440/480
During library configuration, use the operator keys for the following
functions:
Setting the SCSI IDs
Default SCSI IDs are assigned at the factory for the library and each tape
drive. Drive blanks are assigned B (for
blank ). This section describes
how to view the default settings and change them if necessary.
³
Important
The library and tape drives must each
have a unique SCSI ID within each SCSI bus. Because
you may have multiple SCSI buses, the library does not
check for duplicate SCSI IDs. It is your responsibility
to make sure you do not assign duplicate SCSI IDs
within a SCSI bus.
To scroll up and down:
> @
or
> @
To move the screen arrow to the left or right
and toggle options:
> @
or
> @
To select the item next to the screen arrow:
>(QWHU@
To return to a previous screen or cancel the
operation without saving:
>(VFDSH@
To return to the Main Screen: Select Main Screen
from the Main Menu
and press
>(QWHU@
.