PAGE 1 OF 6
0323 IH-8945
TOOL CABINETS
1-800-295-5510
uline.com
π
H-8945, H-8946, H-8947
H-10801, H-10802
CAUTION! Do not open more than one loaded
drawer at a time.
• Lock drawers before moving.
• Do not stand on the product. You may fall, which
may cause personal injury.
• Do not mount the product on truck bed or any other
moving object.
• Apply brakes on swivel casters when not moving unit.
• Do not pull. Push to move.
• Do not step in the drawers. You may fall, which may
cause personal injury.
• Lubricate the top and bottom channels of the
drawer slides at least twice a year.
PARTS
SAFETY
ASSEMBLY
TOOLS NEEDED
12 mm Combination Wrench
13 mm Combination Wrench
Phillips Screwdriver
Figure 1
Tool Cabinet x 1
5/16 x 5/8
"
Hex Head Bolt x 16
(for H-8945 & H-8946 only)
M16 x 15 Screw x 4
M8 x 25
Hex Head Bolt x 16
(for H-8947 only)
Lock Washer x 16
(for H-8945 &
H-8946 only)
Washer x 4
(H-8947 x 20)
Drawer Liner x 4
(6 for H-8946)
(11 for H-8947)
Swivel Caster x 2
Rigid Caster x 2
Handle x 1
Cabinet Key x 2
ATTACH HANDLE
1. Insert handle into slots on side of tool cabinet.
(See Figure 1)
2. Insert four screws with washers through the holes in
the handle. Secure using Phillips screwdriver, but do
not tighten.
3. Once all screws are installed, tighten screws
completely.
M16 x 15
Screws
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
