ABB CRB 1100, Product Manual

Page: 700 / 720

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example application Material
Base, base adapter, swing, swing support, lower arm,
lower arm support, swing, covers, motors, gearboxes,
SMB unit, etc Aluminium
Serial measurement board Batteries, Lithium
Cables, motors Copper
Serial measurement board Lead
Motors Neodymium
Gearboxes, process hub, etc Oil, grease
Cables, SMB unit, gearboxes, timing belt, cooling
pads, connector kits, etc Plastic/rubber
Base, swing, lower arm, extender unit, wrist, motors,
gearboxes, SMB unit, etc Steel
Continues on next page
700 Product manual - CRB 1100
3HAC078007-001 Revision: J
© Copyright 2021-2023 ABB. All rights reserved.
8 Decommissioning
8.2 Environmental information