background image

The TA566 is snapped into the back side of the device's housing 

Ä

 “Mounting I/O modules on a

metal plate” on page 940

.

Parameter

Value

Weight

5 g

Dimensions

29 mm x 28 mm x 5 mm

Part no.

Description

Product life cycle phase *)

1TNE 968 901 R3107

TA566, wall mounting acces-

sory, 100 pieces

Active

*) Modules in lifecycle Classic are available from stock but not recommended

for planning and commissioning of new installations.

2.6  AC500 (Standard)

2.6.1  System data AC500

2.6.1.1 

Environmental conditions

Table 196: Process and supply voltages

Parameter

Value

24 V DC

 

 

Voltage

24 V (-15 %, +20 %)

Protection against reverse polarity

Yes

120 V AC

 

 

Voltage

120 V (-15 %, +10 %)

Frequency

50/60 Hz (-6 %, +4 %)

230 V AC

 

 

Voltage

230 V AC (-15 %, +10 %)

Frequency

50/60 Hz (-6 %, +4 %)

120 V AC...240 V AC wide-range supply

 

 

Voltage

120 V...240 V (-15 %, +10 %)

Frequency

50/60 Hz (-6 %, +4 %)

Allowed interruptions of power supply, according to EN 61131-2

 

DC supply

Interruption < 10 ms, time between 2 interrup-

tions > 1 s, PS2

AC supply

Interruption < 0.5 periods, time between 2

interruptions > 1 s

NOTICE!

Exceeding the maximum power supply voltage for process or supply voltages

could lead to unrecoverable damage of the system. The system might be

destroyed.

Handling

instruction

Technical data

Ordering data

 

System assembly, construction and connection

AC500 (Standard) > System data AC500

2022/01/31

3ADR010278, 3, en_US

971

Summary of Contents for AC500 V3






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: