ABB AC500 V3 Hardware Manual Download

Page: 909 / 1029

NOTICE!
PLC damage due to operation conditions

Protect the devices from dampness, dirt and damage during transport, storage

and operation!

NOTICE!
PLC damage due to wrong enclosures

Due to their construction (degree of protection IP 20 according to EN 60529)

and their connection technology, the devices are suitable only for operation in

enclosed switchgear cabinets.

Cleaning instruction
Do not use cleaning agent for cleaning the device.

Use a damp cloth instead.

Connection plans and user software must be created so that all technical safety aspects, legal

regulations and standards are observed. In practice, possible shortcircuits and breakages must

not be able to lead to dangerous situations. The extent of resulting errors must be kept to a

minimum.

Do not operate devices outside of the specified, technical data!

Trouble-free functioning cannot be guaranteed outside of the specified data.

NOTICE!
PLC damage due to missing grounding

–

Ensure to earth the devices.

–

The grounding (switch cabinet grounding, PE) is supplied both by the mains

connection (or 24 V supply voltage) and via DIN rail. The DIN rail must be

connected to the ground before the device is subjected to any power. The

grounding may be removed only if it is certain that no more power is being

supplied to the control system.

In the description for the devices (operating manual or AC500 system description), reference is

made at several points to grounding, galvanic isolation and EMC measures. One of the EMC

measures consists of discharging interference voltages into the grounding via Y-type capacitors.

Capacitor discharge currents must basically be able to flow off to the grounding (in this respect,

see also VBG 4 and the relevant VDE regulations).

CAUTION!
Do not obstruct the ventilation for cooling!

The ventilation slots on the upper and lower side of the devices must not be

covered.

System assembly, construction and connection

Safety instructions

2022/01/31

3ADR010278, 3, en_US

909

Summary of Contents for AC500 V3






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AC500 V3

Reviews:

Related manuals for AC500 V3

Brands by name

Popular brands

ABB AC500 V3, Hardware Manual

Search results

Summary of Contents for AC500 V3

Reviews:

Related manuals for AC500 V3

Brands by name

Popular brands