Parameter
Value
With resistive loads
Max. 1 Hz
With inductive loads
On request
With lamp loads
On request
Short-circuit-proof / Overload-proof
No, should be provided by an external fuse
or circuit breaker
Rated protection fuse (for each channel)
On request
Overload message
No
Output current limitation
No
Resistance to feedback against 24 V DC
No
Connection of 2 outputs in parallel
Not possible
Lifetime of relay contacts (cycles)
100,000 at rated load
Max. cable length *)
Shielded
On request
Unshielded
On request
*) For fast inputs and fast outputs including PTO and PWM, a shielded cable must be used and
the max. cable length is 50 m.
Table 18: PM5032-R-ETH and PM5052-R-ETH
Parameter
Value
Number of channels per module
6 normally-open relay outputs
Distribution of the channels into groups
2 groups for 3 channels
Galvanic isolation
Yes, per group
Connection of the channels NO0 to NO2
Terminals 14 to 16
Connection of the channels NO3 to NO5
Terminals 18 to 20
Reference potential R0..2 for the channels NO0
to NO2
Terminal 17
Reference potential R3..5 for the channels NO3
to NO5
Terminal 21
Relay output voltage
Rated value
24 V DC or
100 V AC...240 V AC
50 Hz/60 Hz
Range
5 V DC...30 V DC
or
5 V AC...250 V AC
Indication of the output signals
1 yellow LED per channel; the LED is on
when the output signal is high (signal 1) and
the module is powered through the I/O bus
Way of operation
Non-latching type
Output delay
0 to 1
Typ. 10 ms
1 to 0
Typ. 10 ms
Rated protection fuse
On request
Device specifications
Processor modules > AC500-eCo
2022/01/31
3ADR010278, 3, en_US
41