Ulvac DC-10-4P, Руководство по эксплуатации

Страница: 56 / 103

DC Pulse Power Supply
【
DC-10-4P
】 5 HOW TO OPERATE
44
Ｆ ：
If the oscillation mode is the continuous mode, the oscillating frequency is displayed. In the
one-pulse or DC mode, 0kHz is displayed.
W
：
In the continuous or one-pulse mode, the set inversion pulse width is displayed.
In the DC mode, 0μs is displayed.
If the synchronous setting is CSLV, "LINK MODE" is indicated on the lower column of the
main screen.
・ If a WARNING occurs, the code is displayed at the upper right of the screen.
For details, see table 4-15, 4-17 “Error code list and the warning code list”.
・
If ERROR occurs, the screen turns into the ERROR display mode.
The error code, the time from when the breaker is closed until the error occurs, and the error name
are displayed.