Ulvac DC-10-4P, Руководство по эксплуатации

Страница: 47 / 103

DC Pulse Power Supply
【
DC-10-4P
】 4 DESCRIPTION OF FUNCTIONS
35
4-8. Selection of oscillation mode
The setting procedure for the selection of each oscillation mode depends on the each operation mode
(LOCAL, USER, HOST/HOST+).
4-8-1. Setup in LOCAL
Selectable on the main screen. It can be selected by changing an item at the lower right on the
screen.
For details, see the description part for operation.
CONT
：
Operation in continuous mode.
1PLS
：
Operation in one pulse mode.
DCMD ： Operation in DC mode.
4-8-2. Setup in USER
The oscillation mode can be selected from combinations of signals of 30-pin and 31-pin ports of
USER IO PORT.
Table 4-14: Combination of selected oscillation modes
Oscillation mode
ONE PULSE MODE
(27pin)
DC MODE (28pin)
Continuous mode HIGH HIGH
One pulse mode HIGH LOW
DC mode LOW HIGH
SELECT WARNING *
LOW LOW
* If both the 30-pin and 31-pin ports of USER IO PORT are set to LOW, the warning process is executed.
4-8-3. Setup in HOST/HOST+
See the operating instruction for serial communication separately.