Ulvac DC-10-4P, Руководство по эксплуатации

Страница: 70 / 103

DC Pulse Power Supply
【
DC-10-4P
】 5 HOW TO OPERATE
58
Table 5-3: Output parameter (limit value, ignition voltage, timer, etc.)
No Description Hierarchically Setting rage
Variable
width
Unit Initial value
1
Setup of the limit value of
the output power.
CNFG/LIMT/POWR 0
～
(α×10)
0.1 kW
Rated
value*1
2
Setup of the limit value of
the output voltage.
*2
CNFG/LIMT/VOLT Oscillation frequency
10kHz
～
150kHz
：
0
～
800
Oscillation frequency
155kHz
～
250kHz
：
0
～
650
1 V
800
650
3
Setup of the limit value of
the output current.
CNFG/LIMT/CRNT 0
～
(α×25)
0.1 A
Rated
value* 3
4 Setup of ignition voltage CNFG/OTHR/IG V 800 ～ 1500 1 V 1500
5 Setup of set point light up
range CNFG/OTHR/SETP 2
～
8
1 %
2
6 Setup of using/non-using
of the ramp FUNC/RAMP/MODE DISBL/ENABL
― ―
DISBL
7 Setup of the rise time from
the start of ramping to the
command value FUNC/RAMP/TIME 0.05 ～ 600
0.01 s 0.05
8 Setup of the initial value
for the start of ramping FUNC/RAMP/STRT 0 ～ 100
1 % 0
9 Setting of oscillation
frequency
Main screen 5kHz ～ 150kHz
155kHz
～
250kHz
1
5
kHz 100
10
Reverse pulse width Main screen
0.4us ～ 5us ※ 2
0.1 us 4.0
11 With/without using
compulsion oscillation
function PULS/FORC DISBL/ENABL
― ― DISBL
*1, 3: It depends on the power configuration.
Example: Two units of DC-10-4P = 20kW structure
*1 (2×10)=20kW *3 (2×25)=50A
*2 Depending on the oscillating frequency currently specified, the limit value changes automatically.