Ulvac DC-10-4P, Руководство по эксплуатации

Страница: 36 / 103

DC Pulse Power Supply
【
DC-10-4P
】 4 DESCRIPTION OF FUNCTIONS
24
4. DESCRIPTION OF FUNCTIONS
This section describes various functions of this power supply.
4-1. Name and function of each part
4-1-1. DC power front panel
②
③
④
⑤
① ⑥
⑦
⑧,⑨,⑩,⑪
⑫ ⑬
⑭
Figure 4-1: Power front panel
Table 4-1: Name and function on the front of power
No. Name Shape Function
①
ON button LED (Green)
Push button
This lights up with the DC output ON.
In LOCAL: the DC output starts to produced by pressing when
INTERLOCK OK,READY lights up.
In USER, HOST: the switch is pressed but there is no response.
②
OFF button Push button
In LOCAL mode, the power output is switched to OFF.
During the USER or HOST, the OFF button is not accepted but an error
can be caused for an emergency stop by holding the OFF button down.
③
Fan inlet
－
Inlet of cooling fan in the power supply
④
ESC/ARC
button
Push button Back to the previous one along the parameter tree.
Pressing together with the FUNC button shows the effective number of
times of the hard arc process.
⑤
ENT/RESET
button Push button Go to the next one along the parameter tree. Decide the set value.
Press together with the FUNC button to reset the FAIL mode.
* Until the error is solved, FAIL LED is not turned off.
⑥
MENU/ERROR
button
Push button The parameter tree appears.
Press together with the FUNC button to display the error log.
⑦
FUNC button Push button Use in combination with another button.
⑧
△
button Push button In the parameter setting, the set value is increased.
⑨
▽
button Push button In the parameter setting, the set value is decreased.
⑩
◁
button
Push button In the parameter setting, the number of digits is increased. In the state
where the parameter tree is displayed, items are selected.
⑪
▷
button
Push button In the parameter setting, the number of digits is decreased. In the state
where the parameter tree is displayed, items are selected.