Trumpf BendMaster 150, Руководство оператора

Страница: 85 / 258

Note
The software version TruTops Bend 5.0 or higher is required for
programming the pivoted-jaw gripper.
Maximum weight 1.5 kg
Maximum size 210 x 297 mm (A4 format)
Sheet thickness 0.75 - 6 mm
Technical data of the workpiece Tab. 3-3
The pivoted-jaw gripper is placed on a linear slide which can
approach two positions from the middle of the coupling: either
160 mm to the left or 160 mm to the right.
The eccentricity of the pivoted-jaw gripper that is thus achieved
prevents frequent re-gripping which would be required due to the
collision contour of the BendMaster.
Many different parts geometries can be machined with different
gripper jaws.
A pneumatically driven turning axis (option) can rotate the grip-
per through 180°. The number of regripping operations can thus
be further reduced.
4.4 Sheet removal station
Small parts are separated from the sheet stack and transferred
to the pivoted-jaw gripper at the sheet removal station.
There are two sheet removal station variants:
■ Sheet removal station without a linear axis, where the sheets
can be separated and removed from a pallet.
■ Sheet removal station with a linear axis, where the blanks
can be separated and removed from two pallets.
■ Sheet removal station with rotary pallet with which sheets
can be separated and removed from four pallets.
B579EN
2015-06-01 Options
3
‐
21