Trumpf BendMaster 150, Руководство оператора

Страница: 160 / 258

Name Description
"Area Types" The loading or unloading area function can be
defined using the different area types
(see "Tab.
4-16", pg. 4
‐
66) , (see "Tab. 4-17", pg. 4
‐
66) .
Tab. 4-15
Area type Color Description
Load Search M Green ■ The approximate search must be started manually.
The number of recorded images which are joined to form
an overall image varies, depending on the size of the area.
The position of the stack in the overall image is determined
by means of the rough recognition process.
Load Search A Red ■ The approximate search is started automatically when a
storage system/pallet conveyor is used.
The number of recorded images which are joined to form
an overall image varies, depending on the size of the area.
The position of the stack in the overall image is determined
by means of the rough recognition process.
Load Search exact Blue The stack is positioned within this area as previously pro-
grammed in TruTops Bend.
Z position search A Orange The loading area is searched for a stack with intermediate
layers. The number of recorded images which are joined to
form an overall image varies, depending on the size of the
area. The position of the intermediate layer in the overall
image is determined by means of the rough recognition
process.
Intermediate layer search exact Pink The intermediate layer stack is positioned within this area
as previously programmed in TruTops Bend.
Area types, receiver Tab. 4-16
Area type Color Description
Unload Precise Cyan The stack is positioned within this area as previously pro-
grammed in TruTops.
Unload Precise White Parts for a quality check can be set down within this area
at periodic intervals.
Deposit rejects Red Parts for which the ACB angle detection sensor system has
indicated an error are deposited within this area.
Area types, unloading areas Tab. 4-17
■ Moving unloading areas by means of drag & drop is only
possible in Z direction.
■ Moving unloading areas in X direction is only possible by
changing the starting point. However, it may be the case
that the BendMaster can no longer approach the unload-
ing positions.
■ If the sheets of the loading stack are larger than the pal-
let, a larger loading area must be defined accordingly.
■ Do not confuse the loading and unloading areas.
4
‐
66
Running in a TruTops program 2015-06-01
B579EN