Trumpf BendMaster 150, Руководство оператора

Страница: 170 / 258

Fig. 42936
14. Press Find stack .
The stack is subjected to the rough recognition process. The
found search results are displayed after rough recognition.
Note
There may be several search results. Image [1/2] means that
the first of the two permissible search results is displayed.
15. Press << and >> to switch back and forth between the per-
missible results.
16. Press Selection in the correct search result. The selected
search result is used as a loading stack. The "Stack layout"
mask appears.
Searching for further loading stacks
Condition
■ The rough recognition process is carried out.
1. Switch to the > Run in > Area menu.
2. Press Display , Images of approximate search .
3. Position the blue cross-hairs from the top left corner of the
screen at the point where the height is to be measured and
the stack is to be searched for.
Note
Since the search results must include the height measuring
point, it must be positioned on the stack to be searched for.
4. Search for further loading stacks using one of the two rough
recognition options (see "Searching for an area", pg. 4
‐
72) .
4
‐
76
Running in a TruTops program 2015-06-01
B579EN