Trumpf BendMaster 150, Руководство оператора

Страница: 102 / 258

Operating element Submenus / description
Press menu:
■ Press servicing : Start bending machine (hydraulics, CNC, tool clamping).
■ Regripping station (generation 1): Reference or master the regripping station.
Control the regripping station manually.
■ Sensors for press : Display position of sensor gauge finger. Teach the sensor
gauge finger. Starting with Software version 5.0: Activation, setup as well as dis-
play of the backstop resistor.
Robot menu:
■ Gripper servicing : Clamp or loosen gripper, manual suction or blasting of sheet,
manual separation at gripper.
■ Gripper deposit position : Pick up or deposit the gripper at the gripper deposit sta-
tion. Teach the gripper deposit.
■ Sheet sensor : Record images with coarse and fine camera.
■ Variables : Only for personnel of TRUMPF's Service Department: view or edit var-
iables.
User key 1:
Key for acknowledging all errors, warnings and information (for TRUMPF Service
only).
User key 2 (for TRUMPF Service only):
Input key during start-up for the calibration of the sensor gauge fingers, the fine
position camera and for mastering the regripping station.
User key 3:
■ Press 1x: Display of the speed in mm/s.
■
Press twice: the acceleration is indicated in mm/s
2
■
Press 3 x: the jerk is indicated in mm/s
3
(the smaller it is, the smoother the
acceleration is)
MOVE COORDINATE SYSTEM button:
This button is used to select the coordinate system in which the axes of the Bend-
Master are moved.
■ For regripping station Generation 1: 5 coordinate systems are available.
■ For regripping station Generation 2: 6 coordinate systems are available.
Displayed coordinate system button:
This button is used to select the coordinate system to be displayed on the screen of
the portable manual control unit or on the stationary 19" screen (option).
■ For regripping station Generation 1: 3 coordinate systems are available.
■ For regripping station Generation 2: 4 coordinate systems are available.
Description of the menus with submenus Tab. 4-1
The ENABLE KEY on the rear side of the portable manual con-
trol unit can be set to three positions in order to switch the
BendMaster operational readiness in manual mode:
■ Not pressed: BendMaster not ready for operation.
■ Pressed halfway: BendMaster ready for operation.
■ Fully pressed: BendMaster not ready for operation.
4
‐
8
Description of the operating elements 2015-06-01
B579EN
Enable key