Trumpf BendMaster 150, Руководство оператора

Страница: 138 / 258

Note
The CNC can only be started if the program is loaded.
After successfully starting the TruBend, the second icon in
the header switches to "TruBend CNC started":
1 Stop hydraulic unit
2 Start hydraulic unit
3 Stop CNC
4 Start CNC
5 Clamp/release upper tool clamp
6 Clamp/release lower tool clamp
7 Approach upper dead point
8 Approach mute point (in auto-
matic mode only)
9 Approach clamping point
10 Approach lower dead point
Fig. 46148
3. Press Up .
4. Press Backgauge position .
5. Change to the TOS user interface with <Alt>+<Tab>.
6. Press
MMI :
4
‐
44
Switching on and referencing the BendMaster 2015-06-01
B579EN
Opening the press beam
Moving the backgauge to
the current bending step
Connecting to the TruBend
control