Trumpf BendMaster 150, Руководство оператора

Страница: 162 / 258

5. At "Mode" select the desired area type (see "Tab. 4-16", pg.
4
‐
66) .
6. Press OK .
Deleting an area
1. Mark the area to be deleted under "Active Areas".
2. Press
Area , Delete .
3. Press Area , Delete all areas .
4. Press OK .
Displaying the area position
1. Press > Set up > Areas .
2. Press Area , Approach laser position .
3. Confirm the query with OK .
The area positions are approached.
4. Press user key 2 to switch on the laser.
The point opposite the starting point of the selected area is
displayed (X) at the HMI user interface.
Fig. 49446
5. Position the pallet.
6. The opposite point of the starting point of the selected area
is displayed (X).
4
‐
68
Running in a TruTops program 2015-06-01
B579EN
Deleting individual areas
All areas, deleting