Trumpf BendMaster 150, Руководство оператора

Страница: 164 / 258

The settings which were made when the job was created
can be modified here for the selected area. The settings
apply to all stacks located in the selected area:
Fig. 68678
Mode with which the loading stack in the selected area can be
processed. Can be defined only for the loading stack.
2. Select "Stack execution mode":
− by stacks (default value): a stack is processed completely
before beginning with the next stack.
− by layers : the highest stack is processed until another
stack has the same height. Once this occurs, processing
proceeds alternately, layer by layer, on all loading stacks
in the area.
The field is only active if by layers has been selected in the
"Stack execution mode" field. Can only be defined for loading
areas.
3. Enter the "height tolerance". Maximum difference in height
between the stacks which is still tolerated for the execution
by layers.
Strategy as to how, after a failed fine recognition in the selected
area, work is to proceed. Can be defined only for loading areas.
4. Select "Error strategy / Recognition":
− As with job setting (default value): the job is resumed
with the programmed settings.
− No error processing : no action is performed after a faulty
fine recognition.
− New rough recognition : after a faulty fine recognition, first
a rough recognition and then a fine recognition are car-
ried out.
4
‐
70
Running in a TruTops program 2015-06-01
B579EN
"Stack execution mode"
"Height tolerance"
"Error strategy/recognition"