Trumpf BendMaster 150, Руководство оператора

Страница: 31 / 258

The main switch has the following positions:
Position Description
0 The machine is switched off and the voltage supply of the
machine is interrupted .
I The machine is switched on.
Tab. 1-3
Note
The Emergency stop function for the press brake is integrated in
the BendMaster control.
EMERGENCY STOP impact buttons are located at the following
points on the machine:
■ On the portable manual control unit.
■ On the support for the portable manual control unit.
■ On each corner post of the safety fencing.
■
Within the protective fence at Column 4.
An EMERGENCY STOP leads to the following:
■
All axis motions stop.
■ All drives are switched off electrically.
■ The power supply of all safety doors is interrupted.
■ The 24 V control voltage is maintained.
■
Vacuum remains.
In manual mode, the enable key on the portable manual control
unit is pressed into the neutral position in order that the axes
can be moved.
In Manual mode, the user may be within the safety fencing. For
that reason, the travel motions of the machine must be
observed.
The pulse trigger switch has the following positions:
Position Description
Not pressed It is not possible to move the axes.
Pressed The axes can be moved.
All axis movement stops when the pulse trigger switch
is released.
Pushed through EMERGENCY STOP is triggered.
Tab. 1-4
The machine can be operated in various operating modes. The
operating mode is selected using the OPERATING MODE key
switch.
B579EN
2015-06-01 Measures to be taken by the manufacturer
1
‐
15
EMERGENCY STOP impact
button
Pulse trigger switch
OPERATING MODE key
switch