Trumpf BendMaster 150, Руководство оператора

Страница: 126 / 258

2.10 Regripping station (option)
Moving the axes of the regripping station
manually
Conditions
■ The AUX move coordinate system is selected.
■ The regripping station has been referenced.
■ No error messages, i.e. green LED on the portable manual
control unit lights up (acknowledge error if red LED is on).
■ Manual or automatic operating mode is active.
■ Manual mode: The BendMaster is ready for operation (pulse
trigger switch on the portable manual control unit has been
pressed, "BendMaster" icon is green).
■ Automatic mode: BendMaster is ready for operation (the
GREEN button was pressed, and the "BendMaster“ icon is
green).
1. Select > Position > Position .
Fig. 52479
2. Select the AUX move coordinate system.
3. Use the Z3 move button for the left gripper arm and the Z4
move button for the right gripper arm to move the regripping
station to the desired position.
4. Select Suction cups On to activate the suction cups.
5. Select Suction cups Off to deactivate the suction cups.
4
‐
32
Operating the BendMaster 2015-06-01
B579EN