Trumpf BendMaster 150, Руководство оператора

Страница: 110 / 258

− "Language": select the language for the user interface.
− "User group": defines the user rights. The following user
levels are possible (in ascending order according to prior-
ity): operator, programmer, administrator, service, devel-
oper.
Note
A logged on user can create new users up to his own user
level. Users with the operator user level cannot create new
users.
4. Press OK
5. Mark the user to be edited.
6.
No . The "User configuration" mask appears.
7. Make the changes.
8. Mark the user to be edited.
9. Press
Delete . The "User configuration" mask appears.
10. Confirm the query.
2.5 Operating modes
The BendMaster has four different operating modes:
■ Automatic mode:
In automatic mode the BendMaster is controlled automatically
by programs.
■ Manual mode:
In manual mode, the BendMaster is moved manually at
reduced speed. The enable key on the portable manual con-
trol unit must be pressed in neutral position.
■ TruBend manual:
The TruBend can be moved manually, i.e. without the Bend-
Master, in TruBend manual operating mode. The BendMaster
must first be moved into the home position.
■ Zero position:
TruBend and BendMaster are not active in the zero position.
4
‐
16
Operating the BendMaster 2015-06-01
B579EN
Edit user
Delete user