Trumpf BendMaster 150, Руководство оператора

Страница: 181 / 258

Name Description
Gripper and travel
motion Simultaneous separation at the gripper and by
travel motion.
Combined separation Tab. 4-24
1 Offset 2 Bracket
Fig. 42938
7. Set a checkmark at "Fine recognition after separation" if an
additional fine recognition process is to be carried out after
the separation, regardless of the fine recognition set.
8. Set a checkmark at "Separate before measuring" if a peeling
cycle is to be carried out prior to the double sheet measure-
ment.
Note
Only peeling is possible at the gripper. Separation is not pos-
sible at the gripper
(see "Tab. 4-23", pg. 4
‐
86) .
Separation is recognized a cycle by the cycle counter.
Selecting double sheet recognition
1. In the "Tooling plan"Press Continue . mask,
or
Ø press > Set up > Separation method .
2. Press Recognition :
B579EN
2015-06-01 Running in a TruTops program
4
‐
87