Trumpf BendMaster 150, Руководство оператора

Страница: 185 / 258

− Without backgauge :
No sensor system is used.
− Alignment left :
The left backgauge sensor is active in the X direction.
− Alignment right :
The right sensor is active in the X direction.
− Alignment left and right :
Both sensors are active in the X direction.
− Clamp left :
The left sensor is active in the Z direction.
− Clamp right :
The right sensor is active in the Z direction.
− Align and clamp left :
The left and right sensors are active in the X direction.
The left sensor is active in the Z direction.
− Align and clamp right :
The left and right sensors are active in the X direction.
The right sensor is active in the Z direction.
Setting the approach strategy
The travel motion of the press beam during bending in combina-
tion with the search movement of the backgauge is set in the
"Approach strategy" field.
1. Select bending step.
2. Set the "approach strategy":
− Backgauge and Y movement :
Travel motion and search movement run parallel. That is
the fastest method and therefore also the default value.
− Y movement before backgauge :
The travel motion of the press beam is carried out before
the search movement of the backgauge, e.g. when horn
tools are used.
− Backgauge before Y movement :
The search motion of the backgauge is carried out before
the travel motion of the press beam, e.g. for short side
lengths.
B579EN
2015-06-01 Running in a TruTops program
4
‐
91