Trumpf BendMaster 150, Руководство оператора

Страница: 166 / 258

When intermediate layers in the loading stack are used, vacuum
monitoring can be deactivated for the selected area during the
time period from the loading to the unloading of the intermediate
layer.
10. Remove the checkmark from "Vacuum monitoring".
Note
The BendMaster is not stopped if no intermediate layer is
picked up or if it is lost during transport.
11. Press Display , Overview to display the graphic again.
12. Press Images of approximate search .
The recorded images already available can be viewed in
order that the rough recognition process does not have to be
repeated when searching for two or more loading stacks.
13. Press Apply . The graphic is displayed again.
6.8 Performing the rough recognition
process (Search within area)
Searching for an area
Condition
■ All axes have been referenced. (see "Referencing the Bend-
Master", pg. 4
‐
39) .
1. Press Search within area .
The loading area is searched. The number of recorded
images varies, depending on the size of the area. The first
image is displayed.
4
‐
72
Running in a TruTops program 2015-06-01
B579EN
"Deactivate vacuum
intermediate layer"
Redisplaying the diagram
Viewing the approximate
search for images
Adopt changes
Recording images