Trumpf BendMaster 150, Руководство оператора

Страница: 63 / 258

Note
The carrying capacity of the authorized auxiliary equipment must
be selected in such a way that the maximum load can be trans-
ported safely.
BendMaster (60) BendMaster (150)
Authorized additional equipment Carrying capacity Carrying capacity
Crane truck for unloading the truck At least 1 t (2205 lb) At least 1 t (2205 lb)
Indoor crane for transporting the
machine Recommendation:At least 1 t
(2205 lb) At least 1 t (2205 lb)
When transporting with a crane: two
type A shackles (DIN 82101) According to the machine weight According to the machine weight
For transport with a crane: adjusta-
ble crane chain According to the machine weight According to the machine weight
Lifting belt According to the machine weight According to the machine weight
Permitted auxiliary tools Tab. 2-16
When transporting the machine with a crane: use two type A
shackles (DIN 82101):
Type A shackle Fig. 52814
In combination with the BendMaster (150), the press brake (Tru-
Bend 5000 series) must be put on a platform.
Notes
■ The TruBend may only be lifted on to the platform using an
indoor crane or mobile crane or a hydraulic hoisting jack. All
other methods are
not permissible .
■ If a mobile crane is also not possible for space reasons, then
the customer must organize this activity himself, e.g. by
assigning a local installation company. Information on this
can be requested from TRUMPF Maschinen Austria.
B579EN
Transport - Version 10
2
‐
19
Shackle
BendMaster (150): TruBend
on a platform