Trumpf BendMaster 150, Руководство оператора

Страница: 218 / 258

Name Description
"Amplification" Setting for the amplification of the contrast in the entire image.
■ 0: No amplification.
■ 5: Maximum amplification.
"Minimum" The entire image is generated from the minimum value of the pixels of the four
snapshots.
"Average" The entire image is generated from the average of the pixels of the four snapshots.
Tab. 4-29
Summary of the position recognition parameters according to the
type of contour:
■ ↑: Increase value..
■ ↓: Reduce value.
■ -: Do not change value.
■ 0: Do not activate.
■ X: Activate.
■ 0/X: Both options.
Simple contour Average contour Complex contour Inner contour
Acceptance - - - -
Elasticity - - - -
Polarity, ignoring 0 0/X 0/X X
Sorting according
to position X X X 0
Tab. 4-30
In principle the following applies:
Position recognition
more tolerant Position recognition
less tolerant
Acceptance - -
Elasticity - -
Polarity, ignoring X 0
Tab. 4-31
Saving the image recorded last
If an image could not be recorded successfully, the image
recorded last for the selected job can be saved for the TRUMPF
Service department or development department for teleservice.
Note
An image recording can only be saved when a job is loaded.
4
‐
124
Error handling 2015-06-01
B579EN