Function
During measurement, mm/inch conversion can be
made at any time. Tolerance needs to be preset
before measurement and auto-identified accordingly.
During measurement, relative zero point can also be
set at any time.
Operating precautions
Keep the unit away from coolant to prevent liquid from getting
into the circuitry
.
Damage may be caused if the unit is subjected to shocks, impact, or dropping.
This may cause the unit to loose its accuracy
Do not operate the test indicator in direct sunlight. Do not store indicators in an
area of extreme high or cold temperature
.
Do not allow any part of digital test indicator to come into contact with voltage.
This could cause damage to the circuitry
Use SR44 (silver oxide cell) battery
.
If the unit is not in use for a long period of time, the battery should be removed
34-219
DIGITAL TEST INDICATOR
OPERATING PRECAUTIONS
Indicator features
1. Measuring lever
2. Base
3.
LCD
display
4.
Inch/mm
switch
5. ZERO
switch
6.
Battery
compartment
7.
Output
Connector
8.
ON/OFF
switch
9. TOL
setting key
Please read the following instructions carefully before using product.
Before operation
Before using the indicator for the first time, please remove the rust preventative oil on the indicator
with a soft cloth.
Remove battery compartment lid and insert a SR44 battery with its positive (+) side facing upward.
