Trumpf BendMaster 150, Руководство оператора

Страница: 201 / 258

Fig. 61853
3. Remove the checkmark from "Activate/deactivate automatic
mode".
4. Press the desired sequence.
5. Enter the desired
material ID . This entry is case sensitive.
The material ID must be known to the storage management
software.
Sequence
− Request material.
− BendMaster automatically moves into parking position.
− The lift gate opens.
− The storage cart enters with the requested material.
− The lift gate closes.
6. Enter the desired pallet ID . This entry is case sensitive.
The pallet ID must be know to the storage management soft-
ware.
Sequence
− Request a pallet.
− BendMaster automatically moves into parking position.
− The lift gate opens.
− The storage cart enters with the requested pallet.
− The lift gate closes.
7. Enter the desired pallet ID . This entry is case sensitive.
− The pallet ID must be know to the storage management
software.
− By default, the SPmI pallet type is defined as an empty
pallet in the storage management program.
Sequence
− Request an empty pallet.
− BendMaster automatically moves into parking position.
B579EN
2015-06-01 Running in a TruTops program
4
‐
107
Requesting material
Requesting a pallet
Requesting an empty pallet