Trumpf BendMaster 150, Руководство оператора

Страница: 136 / 258

The axes to be referenced appear in the right-hand side of
the monitor screen against a blue background.
Fig. 49445
Rotational movement with loaded gripper can lead to
collisions!
Ø Check for any risk of collision prior to the reference run of
the D axis.
3. BendMaster (60):
Move the D axis until the reference marks are in alignment
with each other.
or
Ø BendMaster (150):
Press the blue D button on the portable manual control
unit.
A reference trip of the D axis is carried out until the inte-
grated reference switch is actuated.
3.3 Referencing TruBend
If no manual reference trip is carried out with the TruBend, then
the reference trip will take place automatically prior to a program
start.
4
‐
42
Switching on and referencing the BendMaster 2015-06-01
B579EN
NOTICE