Trumpf BendMaster 150, Руководство оператора

Страница: 106 / 258

Icons Status
BendMaster/regripping station not ready for operation
(red).
No connection (TruBend communication).
TruBend not ready for operation (red).
TruBend CNC stop (blue).
TruBend CNC start (green).
Green: pallet scales connected to control system.
Red: pallet scales not connected to control system.
Gray: pallet scales switched off or not configured.
Green with cross: pallet scales with error, e.g. COM
port used.
Green with check mark: pallet scales connected to
control system and used in the current project.
■ Green triangle: job is currently being executed.
■ Red square: job execution has been stopped.
■ Yellow double line: execution of program is inter-
rupted.
Name of loaded job.
Single job SO (Single Order mode): Default process-
ing mode. Is activated as soon as a job is selected in
the job page or carried out in the >
Setup menu.
Production plan mode: Execution mode if a job pack-
age or production list is started in the >
Production
plan menu
Tab. 4-2
■ Red: an error is present. Read out, eliminate and acknowl-
edge the error in the menu >
Diagnostics > Existing mes-
sages . The indicator light then turns orange.
■
Orange: BendMaster is ready. It can be operated in the
desired operating mode after meeting the respective enabling
conditions.
4
‐
12
Operating the BendMaster 2015-06-01
B579EN
Indicator light on safety
fencingLamp