Trumpf BendMaster 150, Руководство оператора

Страница: 212 / 258

Depending on the recorded image, the program provides a num-
ber of valid results (0-99) which are sorted according to their
quality. The better the contours found in the recorded image cor-
respond to the fine position model from the CAD data, the higher
the quality.
Tip
The quality of the results can be seen in the image of the fine
position model:
■ Green lines indicate that the program has found the contour
of the fine position model at this point in the recorded image.
■ Red lines indicate that the contour has not been found.
■ Yellow lines indicate that the contour has been partially
found.
Fig. 52330
The result of best quality can always be referred to in the
approximate position recognition process.
This does not necessarily have to be the case with fine recogni-
tion. If the fine recognition window is an outer contour, the high-
est part may not necessarily be the best result. That is why in
this case the search results are still sorted according to their
position.
4
‐
118
Error handling 2015-06-01
B579EN