Trumpf BendMaster 150, Руководство оператора

Страница: 125 / 258

Lay down gripper
Conditions
■ Manual or automatic operating mode is active.
■ No error messages, i.e. green LED on the portable manual
control unit lights up (acknowledge error if red LED is on).
■ BendMaster is ready for operation:
− In manual mode: The enable key on the portable manual
control unit has been pressed, the "BendMaster“ icon is
green.
− In automatic mode: the GREEN BUTTON has been
pressed and the "BendMaster" icon is green.
■ A free deposit place is available at the gripper changing con-
sole.
■ The gripper is loaded at the BendMaster.
1. Select > Robot > Gripper deposit station menu.
2. Select Lay down gripper .
3. Select the number of the gripper deposit station where the
gripper is to be deposited in "Parameter".
Note
Only those stations on which there is no gripper can be
selected:
4. Select Ok . The gripper is set down.
5. Check whether the gripper name is correct. The gripper
name is only entered correctly if the gripper type has also
been loaded in the control.
B579EN
2015-06-01 Operating the BendMaster
4
‐
31