Trumpf BendMaster 150, Руководство оператора

Страница: 57 / 258

3. Compressed air supply
Note
The connection point is indicated on the installation plan using
this symbol.
The BendMaster needs a separate compressed air supply. The
compressed air connection may be flexible or may consist of a
fixed pipe to the BendMaster's optional switch cabinet.
Property Requirement
Required pressure 6±1 bar (87±15 psi)
Air consumption (required volume
rate of flow according to ISO 1217
or DIN 1945)
Average: 2 - 8 m
3
/h (1.18 -
4.71 cfm)
Compressed air supply connected loads Tab. 2-8
Property Requirement
Min. nominal diameter of the sup-
ply line 13 mm (1/2")
Min. nominal diameter of the main
line 13 mm (1/2")
Length of the connecting line No limit
Supply lines compressed air supply Tab. 2-9
Property Requirement Quality
class
1
Recommendation
Dust-free Maximum particle size:
15 µm 4 Air filter in front of the
system
Conden-
sate-free Cooled down to +7°C
(+44.6°F) pressure
dew point 5 Cold dryer
Oil-free Maximum oil content:
5 mg/m
3
4 Oil-free sealing screw-
type compressor with
active carbon filter
Compressed air properties at the tapping point Tab. 2-10
1 ISO°8573-1; 2010 edition
B579EN
Compressed air supply - Version 10
2
‐
13
Compressed air supply
Compressed air supply
connected loads
Supply lines compressed air
supply
Compressed air properties
at the tapping point