Trumpf BendMaster 150, Руководство оператора

Страница: 153 / 258

6.6 Defining job details
Notes
■ In order to be able to switch over directly into the job details,
a job must be opened or loaded. If this is not the case, then
the job is loaded directly.
■ All settings which are defined in the job details are stored in
the respective job and apply to all loading and unloading
areas.
■ The settings for individual areas can be modified in the "Area
details" mask
Defining exposure details
1. In the "Job" mask, press Continue .
or
Ø Press > Set up > Job details .
2. Press Details > Tool holder .
Fig. 76910
3. Define the parameters in the areas.
B579EN
2015-06-01 Running in a TruTops program
4
‐
59