Trumpf BendMaster 150, Руководство оператора

Страница: 196 / 258

6.15 Production planning
There are three levels in the production planning of the Bend-
Master:
■ Production lists.
A production list may consist of production packages and
jobs. It may contain a maximum of 10 elements.
If no loading or unloading stack is available, then the execu-
tion of the production plan is continued with the next job, pro-
duction package or production list.
■ Production packages.
A production package may consist of one or more jobs. A
production package may contain a maximum of 10 jobs.
If no loading or unloading stack is available, then the execu-
tion of the job is completely stopped.
A number of repetitions can be programmed for the entire
production package.
■ Jobs.
A job contains one bending part and the quantity as to how
often it is to be produced. In addition, the speed can also be
set.
Creating or modifying a production plan
Conditions
■ It must be possible to use the tool setup plan for TruBend
and the regripping station for
all jobs within the production
package.
■ The required grippers are in the gripper deposits.
■ All jobs of the production package have been retracted.
1. Select > Position > Production plan :
Tip
Press >> or << to show or hide the tabs on the right-hand
side.
2. Select "Production list" to create or open a production list.
or
Ø Select "Packages" to create or open a production pack-
age.
3. Press
.
4. Enter the name of the production list or production package
under "Parameter".
5. Mark the desired production package or production list.
4
‐
102
Running in a TruTops program 2015-06-01
B579EN
Opening a production plan
Create production package
or production list
Open production package or
production list