Trumpf BendMaster 150, Руководство оператора

Страница: 238 / 258

3. In case necessary: request Technical Service.
Regripping station
Maintenance interval: As needed
Means, Tools, Materials
■ If necessary: muffler (material no. 0137657)
The muffler must be cleaned when the suction power of the vac-
uum ejector is reduced. If the suction power is still not correct
after cleaning, the muffler must be replaced.
1 Silencer
Regripping station suction cup Fig. 71049
1. Shut down the machine properly, secure the MAIN SWITCH
and secure with a padlock.
2. Screw out the muffler.
3. Blow out the muffler with compressed air.
or
Ø Replace the muffler if it is severely soiled.
4. Switch on the system again in manual mode.
5. Check vacuum function at the regripping station.
5
‐
12
Mechanical elements 2015-06-01
B579EN
106622:
Cleaning or replacing the
muffler