YYZ Lighting Inc., 1175 Squires Beach Rd, Unit 2, Pickering, ON L1W 3V3, Canada. www.yyzlighting.com
Page 1 of 3
SAFETY NOTES FOR INSTALLATION
LYNX WALL LIGHT
INSTALLATION
IP65
LNX
LNX Series
220
280
127
115
265
205
Ø22
Recessed housing
1
Hex Key L
-
Wrench
4mm
2
Hex Key L
-
Wrench
3mm
Please refer to the installation guide and use accessories only that accompanies the product. The Warranty will
not be effective subject to the condition when the products are used with other materials which is not specified
by the installation guide.
• Before starting installation, please make sure to read the installation guide and safety instruction
carefully.
• The products must be carefully inspected before installation and do not install them if there is any
damage found during the transportation, storage or handling.
• Please refer to the installation guide and use accessories only that accompanies the product. The
Warranty will not be effective subject to the condition when the products are used with other materials
which is not specified by the installation guide.
• Please keep and follow the condition when voltage limit value is not exceeded.
• Please get the recommended power supply that meets the specification when it is required. If the power
supply is not suitable it may cause immediate damage or unstable operation.
• Please make sure all wire connections and insulations and thoroughly check the protection against the
water immersion.
• Any physical impact will cause product damage or operational failure.
• Since LED components are sensitive to static electricity please carefully install the products to avoid any
damage.
• Please make sure the installation place must be free from any risks such as falling and personal injury.
The products should be securely fixed considering their weight.
• The product must be installed in the environment that complies with its intended use of IP rating and
ambient temperature.
• The products cannot be located in humid places or in the flood prone areas.
• When the product requires the recessed housing, it should be installed with its original shape. Any
deformation of the housing may cause a put together problem.
• For the use of in-ground luminaires, a watering facility is required to prevent the products from being
completely submerged in water. The customer will not claim any product defects when they don’t follow
the instructions.
• Please make sure the products (except for in-ground luminaires) not to be buried under the stated
guideline. It may cause a decrease in product life cycle.
