Spectra Optia Apheresis System Operator’s Manual
35
Introduction
2
Screen Colors
The Spectra Optia system uses a color scheme to indicate the different procedure states, allowing you to quickly
determine the progress of the procedure. Table 2-13 describes the color that corresponds to each procedure state.
Screen Buttons
The screen displays active and inactive buttons, as shown in the following examples:
•
Active button:
Active buttons are colored according to the procedure state and appear as if they are raised. Touch an active
button to enter, change, or save data, or to proceed to the next activity or action.
•
Inactive button:
Inactive buttons are gray. They indicate that the action or the information is not available.
Table 2-13:
Color schemes for procedure states
Procedure State
Color
Load, prepare procedure, tubing set test, prime (patient is not connected)
Teal
Run, rinseback, disconnect test (patient is connected)
Blue
Unload, procedure summary, next procedure (patient has been disconnected)
Burgundy
SpectraOptiaOpsManual.book Page 35 Thursday, May 17, 2018 11:24 AM
