5
Spectra Optia Apheresis System Operator’s Manual
67
Preparing to Perform a Procedure
Snapping the Cassette into the Cassette Tray
1
Take the cassette out of the package and put the bottom of the cassette into the bottom edge of the cassette
tray (Figure 5-3).
Figure 5-3:
Cassette snapped into the cassette tray
2
Ensure that there is nothing lodged behind the cassette or the tray that could interfere with the loading.
3
Press on the top corners of the cassette to snap the cassette into the tray.
Loading the Channel into the Centrifuge
1
Take the channel out of the package and put it on top of the centrifuge cover. Set the empty package aside.
2
Open the centrifuge door.
3
Locate the pin on the filler latch. Raise the latch by pushing the pin toward the center of the filler while
pulling the latch up.
4
Turn the centrifuge so that the loading port faces you.
5
Extend the lines between the cassette and the channel, and ensure that they are not twisted.
SpectraOptiaOpsManual.book Page 67 Thursday, May 17, 2018 11:24 AM
