9
Spectra Optia Apheresis System Operator’s Manual
117
Red Blood Cell Exchange (RBCX) Procedures
Preparing to Perform a Procedure
Supplies
Assemble the supplies listed on page 62 before you begin a procedure. You will also need the following additional
supplies:
•
Replacement fluid prescribed by the patient’s physician
Optional supplies:
•
Filters for the replacement fluid
Selecting the Procedure and Loading the Tubing Set
Follow the instructions starting on page 64 to select the procedure and load the tubing set. Before you load the
tubing set, verify that the set and the solutions you are using have not expired by checking the expiration date
printed on the packaging. Do not use an item if the current date is past the expiration date.
Navigating the RBCX Procedure Screens
Menu Buttons and Tabs
Table 9-1 shows the menu buttons and tabs to use to navigate the screens during an RBCX procedure. Menu
buttons and tabs are active depending on the current operating state. Touch a menu button to display the
corresponding tabs.
Descriptions of Buttons, Icons, and Images
See Table 2-14 on page 36 for descriptions of the buttons, icons, and images that can appear on the screen during
an RBCX procedure.
Table 9-1:
Menu buttons and tabs on RBCX procedure screens
Config
Data
Run
End Run
System
Patient data
Exchange status
Rinseback
Report
Fluid
Operation status
Disconnect
Procedure
Alarm history
Bolus
Run targets
RBCX
Report
Strobe
Blood warmer
Run values
Options
SpectraOptiaOpsManual.book Page 117 Thursday, May 17, 2018 11:24 AM
