Spectra Optia Apheresis System Operator’s Manual
49
Configuring the Spectra Optia System
4
Configuring Procedure-Independent Operating Parameters
Tables 4-1 through 4-3 show the configuration parameters and setting options for the operating parameters that
apply to all procedures.
System
Table 4-1 shows the operating parameters to configure for the system.
Table 4-1:
System configuration parameters and setting options
Tab
Parameter
Description
Setting Options
System
Language
Language that appears on the screen.
A language must be configured before a procedure can
be selected. The language cannot be changed after the
procedure is selected.
Multiple languages
available
Time format
Format used to display the time.
• hh:mm (24-hour)
• hh:mm (12-hour, a.m./
p.m.)
Decimal
Punctuation used to represent a decimal point.
• 0,00 (comma)
• 0.00 (point)
Current time
Current time.
• hh:mm (24-hour)
• hh:mm (12-hour, a.m./
p.m.)
Alarm volume
Audible volume of the alarm tone.
• Low
• High
Date format
Format used to display the date.
• mm-dd-yyyy
• dd-mm-yyyy
Software
Software version and verification value for each type of
procedure.
This information is used to confirm that the system
software version and the verification value for a
particular procedure type have not changed after
software for a new procedure type was installed.
Not configurable
Current date
Current date.
• mm-dd-yyyy
• dd-mm-yyyy
SpectraOptiaOpsManual.book Page 49 Thursday, May 17, 2018 11:24 AM
