Maintaining the Spectra Optia System
232
Spectra Optia Apheresis System Operator’s Manual
Cleaning and Disinfecting the System Components
This section contains instructions for cleaning and disinfecting the components that can come in contact with dirt
and infectious material. Use the solutions and materials described under “Cleaning and Disinfecting the
Spectra Optia System” when performing these activities. The operator is responsible for cleaning and disinfecting
these components.
Surface of the System
Exterior surfaces
Wipe the exterior surfaces of the Spectra Optia system using a mild detergent or a disinfecting solution.
Touch screen
1
Wipe the touch screen, using a mild detergent or a disinfecting solution.
2
Dry the touch screen, using a gauze pad or a soft, lint-free cloth.
Components on the Front Panel
Fluid spilled on the components on the front panel could interfere with the system operation even if it is not
visible. For the location of the components, see “Front Panel” on page 23.
Sensors and detectors
1
The sensors are easier to access if the cassette tray is in the lowered position. Perform the following steps to
lower the cassette tray:
a. Turn on the system.
b. Touch
Select Procedure
. The procedure selection screen appears.
c. Select any procedure and touch
Confirm
.
d. When the screen that instructs you to load a tubing set appears, do not load a tubing set.
e. Touch
Load
. The system lowers the cassette tray.
f. Turn off the system.
2
Wipe the sensors and the detectors, using water or a disinfecting solution.
3
After disinfecting, wipe the sensors and the detectors again, using water to remove any residue left by the
disinfecting solution.
Valves
Wipe the surfaces of the valves, using mild detergent or a disinfecting solution.
Caution:
To avoid damaging the touch screen, do not douse the touch screen with fluid or leave fluid on the
screen after cleaning or disinfecting the screen. Always dry the screen with a gauze pad or a clean cloth after
exposing it to fluid.
SpectraOptiaOpsManual.book Page 232 Thursday, May 17, 2018 11:24 AM
