manualshive.com logo in svg

Siemens sinamics dcp, Руководство пользователя

Продукт Siemens Sinamics DCP представляет собой высококачественный преобразователь частоты, который обеспечивает надежное управление электродвигателями. Вы можете бесплатно скачать его руководство по эксплуатации на manualshive.com для получения подробной информации о настройке и использовании этого устройства.

Поделиться
Скачать
background image

SINAMICS DCP
List Manual (LH21), 05/2016 

151

2 Parameters

2.2 List of parameters

Description:

Sets the delay time for the output of the fault for the Terminal Module 150 (TM150).
The timer is started when the alarm threshold (e.g. p4102[0]) is exceeded.
If the delay time has expired and the alarm threshold has, in the meantime, not been fallen below, then the 
corresponding fault is output.
The fault can be acknowledged, if, after the delay time has expired, the alarm threshold is again fallen below.
For sensor type "KTY84", "PT100", "PT1000" (p4100[0...11] = 2, 5, 6) the following applies:
- If the fault threshold (e.g. p4102[1]) is exceeded before the delay time has expired, then the corresponding fault is 
immediately output.
For sensor type "PTC thermistor", "Bimetallic NC contact" (p4100[0...11] = 1, 4), the following applies:
- Alarm and fault threshold simultaneously respond. The fault is only issued after the delay time has expired.

Index:

[0] = Temperature channel 0
[1] = Temperature channel 1
[2] = Temperature channel 2
[3] = Temperature channel 3
[4] = Temperature channel 4
[5] = Temperature channel 5
[6] = Temperature channel 6
[7] = Temperature channel 7
[8] = Temperature channel 8
[9] = Temperature channel 9
[10] = Temperature channel 10
[11] = Temperature channel 11

Dependency:

Refer to: p4102, r4104, r4105, p4118

Warning:

The fault F35207 ... F35210 and F35400 ... 35407 only results in the drive being shut down if at least one BICO 
interconnection exists between the drive and the TM150.

Note:

For p4103 = 0 s and sensor type "KTY84", "PT100", "PT1000" (p4100[0...11] = 2, 5, 6) the following applies:
- The corresponding fault can only be initiated via the fault threshold (output of the timer is always a logical 0).
For p4103 = 0 s and sensor type "PTC thermistor", "Bimetallic NC contact" (p4100[0...11] = 1, 4), the following 
applies:
- The corresponding alarm and fault are simultaneously output (delay time = 0 s).

Description:

Sets the delay time for the output of the fault for the Terminal Module 31 (TM31).
The timer is started when the alarm threshold (p4102[0]) is exceeded.
If the delay time has expired and the alarm threshold has, in the meantime, not been fallen below, then fault F35207 
is output.
The fault can be acknowledged, if, after the delay time has expired, the alarm threshold is again fallen below.
For sensor type "KTY84" (p4100 = 2), the following applies:
If the fault threshold (p4102[1]) is exceeded before the delay time has expired, then fault F35207 is immediately 
output.
For sensor type "PTC thermistor" (p4100 = 1), the following applies:
- Alarm and fault threshold simultaneously respond. The fault is only issued after the delay time has expired.

Dependency:

Refer to: r4104

Warning:

Fault F35207 only causes the drive to be shut down if there is at least one BICO interconnection between the drive 
and TM31.

Note:

With p4103 = 0 ms, the timer is de-activated and only the fault threshold is effective.

p4103[0...11]

TM150 delay time / TM150 t_delay

TM150

Can be changed:

 U, T

Access level: 

1

Data type: 

FloatingPoint32

Func. diagram: 

9626, 9627

Min Max 

Factory 

setting 

0.0 [s]

600.0 [s]

0.0 [s]

p4103

TM31 temperature evaluation delay time / TM31 temp t_delay

TM31

Can be changed:

 U, T

Access level: 

1

Data type: 

FloatingPoint32

Func. diagram: 

9576

Min Max 

Factory 

setting 

0.000 [ms]

600000.000 [ms]

0.000 [ms]

Siemens Parts

Содержание sinamics dcp







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для sinamics dcp

Unipower SLI 15 User Manual preview
SLI 15
Бренд: Unipower Страницы: 19
Fagor SV2 Installation Manual preview
SV2
Бренд: Fagor Страницы: 12
GE HOME NERATOR SYSTEM 18000 WATT Installation And Start-Up Manual preview
HOME NERATOR SYSTEM 18000 WATT
Бренд: GE Страницы: 84
Champion Global Power Equipment 201057 Operator'S Manual preview
201057
Бренд: Champion Global Power Equipment Страницы: 40
Magnimage LED-500CD User Manual preview
LED-500CD
Бренд: Magnimage Страницы: 40
Olimpia splendid Maestro Pro 01925 Service Manual preview
Maestro Pro 01925
Бренд: Olimpia splendid Страницы: 60
Wagan 5000W AC Power Inverter User Manual preview
5000W AC Power Inverter
Бренд: Wagan Страницы: 11
DASS Tech Soleaf DASS 100i Operation And Installation Manual preview
Soleaf DASS 100i
Бренд: DASS Tech Страницы: 56
Bang & Olufsen Beosound 2000 User Manual preview
Beosound 2000
Бренд: Bang & Olufsen Страницы: 12
CanadianSolar CSI 23KTL-CT/US-480 Installation Manual preview
CSI 23KTL-CT/US-480
Бренд: CanadianSolar Страницы: 88
Plexim PLECS RT Box Manual preview
PLECS RT Box
Бренд: Plexim Страницы: 8
Wisenet SPE-410 Quick Manuals preview
SPE-410
Бренд: Wisenet Страницы: 8
AVT MAGIC EEC Hardware & Software Manual preview
MAGIC EEC
Бренд: AVT Страницы: 82
Dometic PP 1002 Installation And Operating Manual preview
PP 1002
Бренд: Dometic Страницы: 292
Littfinski Daten Technik S-DEC-4-DC-B Assembly Instruction preview
S-DEC-4-DC-B
Бренд: Littfinski Daten Technik Страницы: 2
MODIX HD-35 User Manual preview
HD-35
Бренд: MODIX Страницы: 26
Kramer Tools 482xl Quick Start Manual preview
Tools 482xl
Бренд: Kramer Страницы: 2
Riello AARIA ONE User Instructions preview
AARIA ONE
Бренд: Riello Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды