manualshive.com logo in svg

Siemens sinamics dcp, Руководство пользователя, Страница: 406 / 518

Поделиться
Скачать
Siemens sinamics dcp Скачать руководство пользователя страница 406

4 Faults and alarms
4.2 List of faults and alarms

SINAMICS DCP

406

 

List Manual (LH21), 05/2016

- only 2 partial lists are permitted. After the second 0, all values must be 0.
- dummy drive object numbers (255) are only permitted in the first partial list.

A01321

Topology: Drive object number does not exist in configuration

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

p0978 contains a drive object number that does not exist.
Alarm value (r2124, interpret decimal):
Index of p0978 under which the drive object number can be determined.

Remedy:

Set p0009 to 1 and change p0978:
Rules:
- p0978 must include all of the drive object numbers (p0101).
- it is not permissible for a drive object number to be repeated.
- by entering a 0, the drive objects with PZD are separated from those without PZD.
- only 2 partial lists are permitted. After the second 0, all values must be 0.
- dummy drive object numbers (255) are only permitted in the first partial list.

A01322

Topology: Drive object number present twice in configuration

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

A drive object number is present more than once in p0978.
Alarm value (r2124, interpret decimal):
Index of p0978 under which the involved drive object number is located.

Remedy:

Set parameter p0009 = 1 and change p0978:
Rules:
- p0978 must include all of the drive object numbers (p0101).
- it is not permissible for a drive object number to be repeated.
- by entering a 0, the drive objects with PZD are separated from those without PZD.
- only 2 partial lists are permitted. After the second 0, all values must be 0.
- dummy drive object numbers (255) are only permitted in the first partial list.

A01323

Topology: More than two partial lists created

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

Partial lists are available more than twice in p0978. After the second 0, all must be 0.
Alarm value (r2124, interpret decimal):
Index of p0978 under which the illegal value is located.

Remedy:

Set p0009 to 1 and change p0978:
Rules:
- p0978 must include all of the drive object numbers (p0101).
- it is not permissible for a drive object number to be repeated.
- by entering a 0, the drive objects with PZD are separated from those without PZD.
- only 2 partial lists are permitted. After the second 0, all values must be 0.
- dummy drive object numbers (255) are only permitted in the first partial list.

A01324

Topology: Dummy drive object number incorrectly created

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

In p0978, dummy drive object numbers (255) are only permitted in the first partial list.
Alarm value (r2124, interpret decimal):
Index of p0978 under which the illegal value is located.

Remedy:

Set p0009 to 1 and change p0978:
Rules:
- p0978 must include all of the drive object numbers (p0101).
- it is not permissible for a drive object number to be repeated.
- by entering a 0, the drive objects with PZD are separated from those without PZD.
- only 2 partial lists are permitted. After the second 0, all values must be 0.
- dummy drive object numbers (255) are only permitted in the first partial list.

Содержание sinamics dcp







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов