manualshive.com logo in svg

Siemens sinamics dcp, Руководство пользователя, Страница: 405 / 518

Поделиться
Скачать
Siemens sinamics dcp Скачать руководство пользователя страница 405

SINAMICS DCP
List Manual (LH21), 05/2016 

405

4 Faults and alarms

4.2 List of faults and alarms

Remedy:

The alarm automatically disappears again with the following actions:
- de-activate the drive object involved (p0105 = 0).
- de-activate the components involved (p0125 = 0, p0145 = 0, p0155 = 0, p0165 = 0).
- re-insert the components involved.
See also: p0105 (Activate/de-activate drive object)

A01316

Drive object inactive and again ready for operation

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

If, when inserting a component of the target topology, an inactive, non-operational drive object becomes operational 
again. The associated parameter of the component is, in this case, set to "activate" (p0125, p0145, p0155, p0165).
Note:
This is the only message that is displayed for a de-activated drive object.

Remedy:

The alarm automatically disappears again with the following actions:
- activate the drive object involved (p0105 = 1).
- again withdraw the components involved.
See also: p0105 (Activate/de-activate drive object)

A01317 (N)

De-activated component again present

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

If a component of the target topology for an active drive object is inserted and the associated parameter of the 
component is set to "de-activate" (p0125, p0145, p0155, p0165).
Note:
This is the only message that is displayed for a de-activated component.

Remedy:

The alarm automatically disappears again with the following actions:
- activate the components involved (p0125 = 1, p0145 = 1, p0155 = 1, p0165 = 1).
- again withdraw the components involved.

A01318

BICO: De-activated interconnections present

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

This alarm is used in the following cases:
- If an inactive/non-operational drive object is active again/ready for operation
- If there are items in the list of BI/CI parameters (r9498[0...29], r9499[0...29])
- If the BICO interconnections saved in the list of BI/CI parameters (r9498[0...29], r9499[0...29]) have actually been 
changed

Remedy:

Reset alarm:
- Set p9496 to 1 or 2
or
- de-activate the drive object again.

A01319

Inserted component not initialized

Drive object:

TM150, TM15DI_DO, TM31

Cause:

Initialization is required for at least one inserted component.
This is only possible if the pulses are inhibited for all the drive objects.

Remedy:

Activate pulse inhibit for all drive objects.

A01320

Topology: Drive object number does not exist in configuration

Drive object:

CU_DCP, TM150, TM15DI_DO, TM31

Cause:

A drive object number is missing in p0978
Alarm value (r2124, interpret decimal):
Index of p0101 under which the missing drive object number can be determined.

Remedy:

Set p0009 to 1 and change p0978:
Rules:
- p0978 must include all of the drive object numbers (p0101).
- it is not permissible for a drive object number to be repeated.
- by entering a 0, the drive objects with PZD are separated from those without PZD.

Siemens Parts

Содержание sinamics dcp







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов