Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 970 / 1202

Service
P31003-H3560-S403-54-7620, 09/05
12-8
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Service and Maintenance Tasks
12.2.2 Effects of Hardware Changes on Customer Data
Any changes to the hardware must be made before creating a copy of the customer database
using HiPath 3000 Manager E. You must ensure that the hardware configuration on the
MMC
of HiPath 3000 is always current.
Hardware changes include:
●
removing or inserting boards (HiPath 3000 only).
●
removing or inserting telephones.
●
removing or inserting add-on devices or adapters.
12.2.2.1 Inserting and Removing HiPath 3000 Boards
Startup rules for inserting and removing boards
7
Caution
When using HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, disconnect
the system from the power supply before removing or inserting boards.
Only HiPath 3800, HiPath 3750 and HiPath 3700 peripheral boards can be removed
or inserted during operation.
Table 12-1 Startup Rules for Inserting and Removing Boards
If Then
Inserting new board in
free slot
Board is integrated into the system according to the rules for initial
startup (Page 4-156).
●
System with default numbering plan
The station numbers from the new board are appended (con-
secutively and in ascending order) to the numbers already as-
signed.
●
System with modified numbering plan
The station numbers on the new board can be in any order.
Using HiPath 3000 Manager E or Assistant T, you can assign a spe-
cific station to a port. If the number is already assigned to a different
object, you can switch both numbers.
Replacing board with
same or under equipped
board type
Board is activated. The same station range is used.