Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 874 / 1202

Workpoint Clients
P31003-H3560-S403-54-7620, 09/05
10-22
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
wclient.fm
optiPoint 500
10.2.3.1 optiPoint Analog Adapter
The optiPoint analog adapter allows an analog device (such as, telephone (DTMF only),
group 3 fax, modem, cordless telephone) to be connected to an optiPoint 500 telephone.
The connected analog device can send and receive calls on the interface to the system regard-
less of the connection status of the optiPoint telephone, as long as a B channel is available.
The adapter must always have a local power supply for operating the connected analog device.
T/R interface properties
●
Supply current: 30 mA
●
Busy signal when both B channels are busy
●
Ring sequence: 2.2
●
Supports only DTMF with Flash
●
No ground signaling allowed
●
Does not support: VoiceMail server with T/R interface, message waiting lamp, dictating
equipment, speaker, announcement device (such as start/stop).
Figure 10-11 optiPoint Analog Adapter
MW6 (RJ11) socket assignments:
Pin Signal
1 Free
2 Free
3 T (Tip)
4 R (Ring)
5 Free
6 Free
6 1