Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 817 / 1202

exup.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
9-3
Expanding and Upgrading HiPath 3000
Expanding HiPath 3000
Replacing board with
over-equipped board
of same type
Board is activated. The old station range is activated and the ports as-
sociated with the new board are inserted at the end. The ports are split
if there is no contiguous station range available.
In the case of subscriber line modules, you can use HiPath 3000 Man-
ager E to retain the old station data by copying it to the new board, or
you can delete it and reset the default state. Copying is not possible
for trunk boards.
Replacing with a dif-
ferent board type
The system does not automatically activate the board.
After removing the old board, you can delete it from the database us-
ing HiPath 3000 Manager E or Assistant T.
After you have inserted the new board, the system activates it as if it
had been inserted into a free slot. However, the CDB area used by the
old board is left as a gap.
In the case of subscriber line modules, you can use HiPath 3000 Man-
ager E to retain the old station data by copying it to the new board, or
you can delete it and reset the default state. Copying is not possible
for trunk boards.
Table 9-1 Startup Rules for Inserting and Removing Boards
If Then