Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 626 / 1202

Installing HiPath 3000
P31003-H3560-S403-54-7620, 09/05
4-148
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
inst_h3.fm
Installing HiPath 3750, HiPath 3700
Structure of the S
0
patch panel C39104-Z7001-B3
CABLUs must be manually connected to the S
0
patch panel (Figure 4-84). You can use the Kro-
ne wiring tool for this.
Refer to the following tables for information on the assignment of the MW8 jacks:
●
Table 3-107 for STMD8 board
●
Table 3-173 for REAL board
>
All incoming cables must be attached to the patch panel using cable ties.
Figure 4-83 S
0
Patch Panel C39104-Z7001-B3
... 7 5 3 1 23 21 19 17 ...
... 8 6 4 2 24 22 20 18 ...
3 x 8 MW8 jacks, numbering
8 1
:
Pin
MW8 jack assignment:
as a subscriber line as a trunk connection
3 Tr R
4 R Tr
5 Receive – Transmit –
6 Transmit – Receive –
Necessary height units for 19-inch cabinet assembly: 1
(one height unit corresponds to approx. 1.7’’=43 mm)