Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 990 / 1202

Service
P31003-H3560-S403-54-7620, 09/05
12-28
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
service.fm
Guided Maintenance
12.3.1.4 Recording the Status of the HiPath 3000 V.24 Interfaces
You can use HiPath 3000 Manager E to view the current status of the V.24 interfaces, in which
case the following information is provided.
●
Status of the trunks (1 = active trunk, 0 = inactive trunk)
The individual trunks are assigned as follows:
DTR = HiPath 3000
DSR = Telephone
RTS = HiPath 3000
CTS = Telephone
This means, for example, that incorrectly connected or damaged cables can be determined
(for more information on this, refer to the HiPath 3000 Manager E Help).
●
V.24 Monitoring
The number of sent/received bytes within a selected time period can be recorded and then
displayed/saved using a text editor (default = MS WordPad
®
).
The failure and restart of a V.24 interface generates an entry in the eventlog and releases a
remote error signal (V.24 failure = “Check printer” error message, V.24 restart = Withdrawal of
error message).
Activated features Status of activated features (on or off):
●
Do Not Disturb
●
Call forwarding (device status)
●
Answer text
●
Room monitor
●
Lock Code
●
Suppress calling ID
●
Call connection
●
Disable incoming ringing
●
Out of Hunt group/Group ringing
●
Call waiting tone
●
Direct Answering
●
Call waiting terminating
●
Ring transfer (only for MULAP)
●
Call forwarding MULAP (only for MULAP)
Stations included List of the stations included
Data Contents