Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 611 / 1202

inst_h3.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
4-133
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.4.3.2 Mounting the System Cabinet with Angle Brackets
An assembly kit (C39165-A7027-D5) with eight angle brackets is provided for installing the 19-
inch cabinet.
Procedure
7
Warning
Never attempt to lift a system cabinet into the 19-inch cabinet without assistance.
Step Activity
1. Attach a right-handed and a left-handed support bracket (A in Figure 4-74) to the
19-inch cabinet using two screws per bracket.
2. Remove the front and rear cabinet covers .
3. Remove both side pieces of the system cabinet.
4. Attach the two angle brackets (B in Figure 4-74) to the front of the system cabinet
using two screws per bracket.
5. Attach the four angle brackets (C in Figure 4-74) to the rear of the system cabinet
for base and cover support.
6. Lift the system cabinet into the 19-inch cabinet and sit the cabinet on the two sup-
port brackets (A). Slide the cabinet into the 19-inch cabinet until the front edge of
the system cabinet is flush with the front of the 19-inch frame.
7. Attach the system cabinet to the angle bracket (B) in the 19-inch cabinet frame
using two screws per bracket.